Sponsor
  • ·
  • Chinese Association of
    Integrative Medicine;
    China Academy of Chinese
    Medicine Sciences
Editing
  • ·
  • Editorial Board of
    China Journal of
    Orthopaedics and Traumatology
Publishing
  • ·
  • Publishing House,
    China Journal of
    Orthopaedics and Traumatology
Overseas Distributor
  • ·
  • China International Book
    Trading Corporation
    P.O.Box 399,Beijing,China
    Code No.M587
Mail-order
  • ·
  • Publishing House,
    China Journal of
    Orthopaedics and Traumatology
    No.16A, Nanxiaojie, Dongzhimennei,
    Beijing 100700,China
    Tel:0086-10-84020925
    Fax:0086-10-84036581
    Http://www.zggszz.com
    E-mail:zggszz@sina.com
3D打印个体化器械操作在全膝关节置换术中的应用现状
Hits: 1936   Download times: 1093   Received:July 04, 2018    
作者Author单位UnitE-Mail
方亮 FANG Liang 浙江中医药大学第一临床医学院, 浙江 杭州 310053
浙江省骨伤研究所, 浙江 杭州 310053
The First College of Clinical Medicine, Zhejiang Chinese Medical University, Hangzhou 310053, Zhejiang, China 984694796@qq.com 
董睿 DONG Rui 浙江中医药大学第一临床医学院, 浙江 杭州 310053
浙江省骨伤研究所, 浙江 杭州 310053
The First College of Clinical Medicine, Zhejiang Chinese Medical University, Hangzhou 310053, Zhejiang, China  
金红婷 JIN Hong-ting 浙江中医药大学第一临床医学院, 浙江 杭州 310053
浙江省骨伤研究所, 浙江 杭州 310053
The First College of Clinical Medicine, Zhejiang Chinese Medical University, Hangzhou 310053, Zhejiang, China  
童培建 TONG Pei-jian 浙江中医药大学第一临床医学院, 浙江 杭州 310053
浙江省骨伤研究所, 浙江 杭州 310053
浙江中医药大学第一附属医院骨科, 浙江 杭州 310006
The First College of Clinical Medicine, Zhejiang Chinese Medical University, Hangzhou 310053, Zhejiang, China  
肖鲁伟 XIAO Lu-wei 浙江中医药大学第一临床医学院, 浙江 杭州 310053
浙江省骨伤研究所, 浙江 杭州 310053
浙江中医药大学第一附属医院骨科, 浙江 杭州 310006
The First College of Clinical Medicine, Zhejiang Chinese Medical University, Hangzhou 310053, Zhejiang, China  
期刊信息:《中国骨伤》2019年32卷,第6期,第582-586页
DOI:10.3969/j.issn.1003-0034.2019.06.020
当今关节置换术已经逐渐成为骨科常见手术,关节置换手术的相关研究亦成为热点,其研究程度也逐渐加深。3D打印技术应用于髋膝关节置换的相关报道逐渐增多,如基于3D打印技术的患者个体化器械操作,其手术辅助作用可观,尤其对于复杂病例的关节置换更为重要,但总体来说个体化器械操作在关节置换术中的运用还处于发展阶段。本文通过回顾相关文献,分析、整理3D打印个体化器械操作在全膝关节置换术中应用的研究现状,主要从个体化术前规划、术中操作、术后功能恢复等方面总结其在膝关节置换术中应用的有效性及在肥胖、膝关节畸形等特殊复杂的膝关节手术病例中应用的必要性,并简述其在当前的临床应用中存在的问题和争议,以期为今后的研究方向及临床应用提供参考。
[关键词]:3D打印技术  关节成形术  置换    综述文献
 
Application status of 3D printing patient-specific instrumentation in total knee arthroplasty
Abstract:Recently,the joint replacement has gradually become a common operation of orthopedics. It's also the hot spot in current investigations. The increasing number of reports about the 3D printing technology such as patient-specific instrumentation(PSI) is applied to hip and knee replacement. It plays an important role in supporting operation especially for complex cases. However,it is still at the primary stage. This article reviews the relevant literature,analyzes and collates the research status of the application of 3D printing PSI in total knee arthroplasty,and summarizes its effectiveness in the application of knee arthroplasty from the aspects of individual preoperative planning,intraoperative operation and postoperative functional recovery,especially complex knee surgery such as obesity and knee deformity. The necessity of clinical application is discussed,and the existing problems and controversies in the current clinical application are summarized in order to provide references for the future research direction and clinical application.
KEYWORDS:3D printing technology  Arthroplasty  replacement  knee  Review literature
 
引用本文,请按以下格式著录参考文献:
中文格式:方亮,董睿,金红婷,童培建,肖鲁伟.3D打印个体化器械操作在全膝关节置换术中的应用现状[J].中国骨伤,2019,32(6):582~586
英文格式:FANG Liang,DONG Rui,JIN Hong-ting,TONG Pei-jian,XIAO Lu-wei.Application status of 3D printing patient-specific instrumentation in total knee arthroplasty[J].zhongguo gu shang / China J Orthop Trauma ,2019,32(6):582~586
View Full Text  View/Add Comment  Download reader
Close




版权所有:Editorial Office of China Journal of Orthopaedics and Traumatology京ICP备12048066号  版权声明
地址:No.16A, Nanxiaojie, Dongzhimennei, Beijing 100700, China
电话:0086-10-84036581 传真:0086-10-84036581 Email:zggszz@sina.com