Sponsor
  • ·
  • Chinese Association of
    Integrative Medicine;
    China Academy of Chinese
    Medicine Sciences
Editing
  • ·
  • Editorial Board of
    China Journal of
    Orthopaedics and Traumatology
Publishing
  • ·
  • Publishing House,
    China Journal of
    Orthopaedics and Traumatology
Overseas Distributor
  • ·
  • China International Book
    Trading Corporation
    P.O.Box 399,Beijing,China
    Code No.M587
Mail-order
  • ·
  • Publishing House,
    China Journal of
    Orthopaedics and Traumatology
    No.16A, Nanxiaojie, Dongzhimennei,
    Beijing 100700,China
    Tel:0086-10-84020925
    Fax:0086-10-84036581
    Http://www.zggszz.com
    E-mail:zggszz@sina.com
第1跖跗关节骨折脱位不同内固定方式对前足足底压力变化的影响
Hits: 2145   Download times: 1533   Received:November 20, 2014    
作者Author单位UnitE-Mail
余霄 YU Xiao 宁波市第二医院骨科, 浙江 宁波 315010 Department of Orthopaedics, Ningbo No.2 Hospital, Ningbo 315010, Zhejiang, China  
庞清江 PANG Qing-jiang 宁波市第二医院骨科, 浙江 宁波 315010 Department of Orthopaedics, Ningbo No.2 Hospital, Ningbo 315010, Zhejiang, China pqjey@sina.com 
期刊信息:《中国骨伤》2015年28卷,第2期,第157-161页
DOI:10.3969/j.issn.1003-0034.2015.02.014
基金项目:宁波市自然科学基金(编号:2014A610250)


目的:测量第1跖跗关节骨折脱位3种内固定对前足足底压力的变化,为选择内固定提供实验参考.

方法:取8具新鲜足标本,制成第1跖跗关节骨折脱位模型,依次进行3.5 mm全螺纹皮质骨螺钉,1/4管形钢板及加压骑缝钉固定.经加载600 N后,通过F-scan足底压力分析系统,测量前足足底压力的变化.

结果:第1跖跗关节骨折脱位后,第1跖骨头下的峰值压力将减小,而第2跖骨头下的峰值压力将增大,差异具有统计学意义(P<0.05).对第1跖跗关节分别采用螺钉、钢板进行固定后,第1、2跖骨头下的峰值压力都将趋于正常状态,而进行骑缝钉固定后,虽然第1、2跖骨头下的峰值压力都有所恢复,但仍与正常状态比较,差异有统计学意义(P<0.05).

结论:当第1跖跗关节骨折脱位后,邻近跖骨头可能存在着"负荷转移"的调节机制以代偿部分足底压力;当第1跖跗关节骨折脱位采用螺钉和钢板内固定治疗后,前足足底压力都可恢复至正常状态,而若采用骑缝钉固定,则前足足底压力仍难以恢复至正常状态.
[关键词]:跖跗关节  骨折  脱位  骨折固定术,内  足底压力  生物力学
 
Forefoot plantar pressure changes of the first tarsometatarsal joint fracture-dislocation fixation by different internal fixations
Abstract:

Objective:To measure the changes of plantar pressure of the first tarsometatarsal joint fracture and dislocation by three different implants to provide experimental reference in selecting implants.

Methods:Eight fresh foot specimens were made into the models of the first tarsometatarsal joint fracture and dislocation,which were fixed with 3.5 mm cortical screw,1/4 tubular plate and compressive staple in turn. After the loading of 600 N,the changes of the plantar pressure in forefoot were measured by the method of the F-scan plantar pressure system.

Results:After first tarsometatarsal joint fracture and dislocation,the peak pressure under the first metatarsal head would decrease,while the pressure under the second metatarsal head would increased,whose differences were statistically significant(P<0.05). When the first tarsometatarsal joint was fixed with screw or plate respectively; the peak pressure under the two metatarsal heads would tend to be normal. However,the staple fixation showed the statistical significant difference compared with normal state,although the peak pressure under the first and second metatarsal heads were recovered in some extent(P<0.05).

Conclusion:After the first tarsometatarsal joint fracture-dislocation,the plantar pressure might be compensated partly by the adjacent metatarsal heads according to the regulation of the load transfer mechanism. While the first tarsometatarsal joint fracture-dislocation was fixated by screw or plate,the plantar pressure of the forefoot would return to the normal state. However,if the joint was fixated by the staple,it would still be difficult to return the plantar pressure to be normal.
KEYWORDS:Ttarsometatarsal joint  Fractures  Dislocations  Fracture fixation,internal  Plantar pressure  Biomechanics
 
引用本文,请按以下格式著录参考文献:
中文格式:余霄,庞清江.第1跖跗关节骨折脱位不同内固定方式对前足足底压力变化的影响[J].中国骨伤,2015,28(2):157~161
英文格式:YU Xiao,PANG Qing-jiang.Forefoot plantar pressure changes of the first tarsometatarsal joint fracture-dislocation fixation by different internal fixations[J].zhongguo gu shang / China J Orthop Trauma ,2015,28(2):157~161
View Full Text  View/Add Comment  Download reader
Close




版权所有:Editorial Office of China Journal of Orthopaedics and Traumatology京ICP备12048066号  版权声明
地址:No.16A, Nanxiaojie, Dongzhimennei, Beijing 100700, China
电话:0086-10-84036581 传真:0086-10-84036581 Email:zggszz@sina.com