前路经枢椎体至寰椎侧块螺钉内固定三维稳定性的实验研究 |
摘要点击次数: 2353
全文下载次数: 1377
投稿时间:2007-11-15
|
作者 | Author | 单位 | Address | E-Mail |
郭亮 |
GUO Liang |
重庆医科大学附属第一医院骨科,重庆 400016 |
Department of Orthopaedics,the First Afiliated Hospital,Chongqing Medical University,Chongqing 400016,China |
|
权正学 |
QUAN Zheng-xue |
重庆医科大学附属第一医院骨科,重庆 400016 |
Department of Orthopaedics,the First Afiliated Hospital,Chongqing Medical University,Chongqing 400016,China |
quanzhx@sina.com |
唐永莉 |
TANG Yong-li |
重庆医科大学附属第一医院骨科,重庆 400016 |
Department of Orthopaedics,the First Afiliated Hospital,Chongqing Medical University,Chongqing 400016,China |
|
|
期刊信息:《中国骨伤》2008年,第21卷,第5期,第353-355页 |
DOI:doi:10.3969/j.issn.1003-0034.yyyy.nn.zzz |
基金项目: |
|
中文摘要:
目的:评价前路经枢椎体至寰椎侧块螺钉内固定三维稳定性。
方法:16具成人标本(C0–C3),对每一标本分别测定完整状态(第1组)、齿状突Ⅱ型骨折(第2组)、后路经关节螺钉内固定术(Magerl技术)(第3组)、 前路经枢椎体至寰椎侧块螺钉内固定(第4组)4种状态下的三维运动范围,并进行统计学分析。
结果:1组与其他3组、2组与其他3组比较差异有统计学意义(P<0.001).前路经枢椎体至寰椎侧块螺钉内固定与后路Magerl螺钉内固定均能显着减少寰枢关节各方向运动范围,两种固定方法差异无统计学意义(P>0.05).
结论:前路经枢椎体至寰椎侧块螺钉内固定的三维稳定性与后路Magerl螺钉内固定术相当,为寰枢椎不稳定及脱位患者的治疗提供了一种可靠的手术选择。 |
【关键词】寰枢关节 骨折固定术,内 关节不稳定性 生物力学 |
|
Biomechanical evaluation of three-dimensional stability of anterior approach screw fixation through C2 vertebral body to C1 lateral mass |
|
ABSTRACT
Objective: To determine the three-dimensional stability of C1-C2 after anterior approach screw fixation through C2 vertebral body to C1 lateral mass for C1-C2 instability or dislocation.
Methods: The three-dimensional range of motion of atlantoaxial joint were measured in 16 human cadaveric specimens under four conditions:the intact state(1st group),odontoid fracture of typeⅡ (2nd group),instrumentation with posterior C1-C2 trans-articular screw fixation(Magerl technique)(3rd group) and anterior approach screw fixation through C2 vertebral body to C1 lateral mass(4th group) respectively.
Results: There was generally significant difference between 1st group and other groups and between 2nd group and other groups by statistics analysis(P<0.001). Range of motion significantly decreased in 3rd group and 4th group in all directions. There was generally no significant difference between the two methods by statistical analysis(P>0.05).
Conclusion: Anterior approach screw fixation through C2 vertebral body to C1 lateral mass provides satisfied stability. It provides the equivalent effect to Magerl technique. It is a kind of reliable surgery choice for the treatment of instability or dislocation of C1-C2 joint. |
KEY WORDS Atlanto-axial joint Fracture fixarion,internal Joint instability Biomechanics |
|
引用本文,请按以下格式著录参考文献: |
中文格式: | 郭亮,权正学,唐永莉.前路经枢椎体至寰椎侧块螺钉内固定三维稳定性的实验研究[J].中国骨伤,2008,21(5):353~355 |
英文格式: | GUO Liang,QUAN Zheng-xue,TANG Yong-li.Biomechanical evaluation of three-dimensional stability of anterior approach screw fixation through C2 vertebral body to C1 lateral mass[J].zhongguo gu shang / China J Orthop Trauma ,2008,21(5):353~355 |
|
阅读全文 下载 查看/发表评论 下载PDF阅读器 |
关闭 |